Cage Bearings - Pivot: 6mm<br>Ceramic Bearings: 1/16 in (13 ball)
Cage Bearings - Pivot: 6mm<br>Ceramic Bearings: 1/16 in (13 ball)
The new bearing compatibility list is now live, check it out here!
Cage bearings that allow more balls to be placed around the knife pivot than standard cage bearings. Which provides more support for the blade and decreasing stress on each ball. The ceramic balls are captured in the disc but are still free floating to prevent binding.
Includes Grade 5 ceramic bearings pre-installed.
- 22% increased blade support over caged bearings of same size
- Improved ball pathing around pivot
- Less pivot screw tightening required
- CNC machined from solid phosphor bronze
Dimensions
ID | OD | Disc | Ball |
0.238" | 0.420" | 0.050" | 0.0625" |
6.04mm | 10.668mm | 1.27mm | 1.59mm |
Ordering details
- One set equals two individual cage bearings
Bearing Compatibility
The below knives have been found to work with this bearing.
Click here to view the full compatibility chart.
Fits my knife standard RR perfect 🇺🇸🤝
Skiff never disappoints, quick delivery packed right with quality bearings 😎
I knew Skiff bearings have a good reputation for quality and I am not disappointed. These bearings have made a noticeable difference to my Smock and Pulsar. Great tracking info and speedy delivery to the UK from the USA. Recommended.
Fit prefect does make a difference
In flipping action
👍🏻👍🏻👍🏻👍🏻👍🏻
This is the third time I've ordered from Skiff and, as usual, the bearings are hi quality and the shipping \ customer service good and efficient. Twosun TS89 and TS444 both use the same 6mm ID bearings with opposing racetrack washers. After a couple emails with my measurements to Skiff it was determined that we couldn't know unless we try. I ordered 2 sets to try and while the ball bearings don't click into the grooves in the racetrack perfectly, they are close enough and work fine. I don't notice a significant performance increase over the factory bearings, they should get faster and faster as they break in with the racetrack bearings.
So for TS89 and TS444 it's not a perfect fit but it's very close and works fine.