SkiffWorkshop
Cage Bearings - Pivot: 1/4<br>Ceramic Bearings: 1mm (22 ball)
Cage Bearings - Pivot: 1/4<br>Ceramic Bearings: 1mm (22 ball)
Couldn't load pickup availability
The new bearing compatibility list is now live, check it out here!
Cage bearings that allow more balls to be placed around the knife pivot than standard cage bearings. Which provides more support for the blade and decreasing stress on each ball. The ceramic balls are captured in the disc but are still free floating to prevent binding.
Includes Grade 5 ceramic bearings pre-installed.
- Increased blade support over caged bearings of same size
- Improved ball pathing around pivot
- Less pivot screw tightening required
- CNC machined from solid phosphor bronze
Dimensions
| ID | OD | Disc | Ball |
| 0.252" | 0.383" | 0.030" | 0.0393" |
| 6.40mm | 9.73mm | 0.76mm | 1mm |
Ordering details
- One set equals two individual cage bearings
I used these in a Demko ad20s and it did seem to make a bit of difference in the action. The action was already great but these just took it up a notch. Very smooth no noise or anything.
Great service and fast shipping. The skiffs always make my knives buttery smooth.
These replacement bearings are fantastic and really do have a noticeable impact to the smoothness of opening and closing. Highly recommended.
I have installed Skiff Bearings in all my knives that have bearing in them. Smooth action. Easy install. These are a must have!!!
I purchased an AD20.5 with Skiff bearings installed and found the action and lockup to be outstanding with zero blade play and a free swing. I then had an older AD20Slim which had sloppy action, I replaced the spring and hardened washers (titanium models) and upgraded the bearings from OEM to Skiff brand. The results exceeded expectations and the action is now perfect, which to be fair is due in part to the spring and washers, however the smoothness and stability you get with these bearings is beyond factory.